>> FOLLOW US ON INSTAGRAM FOR SPECIAL DISCOUNTS @ THE.BIKEHOUSE!!! <<

GASGAS 3M GRAPHICS KIT 2018 2019 2020 ALL BIKES 125cc +
GASGAS 3M GRAPHICS KIT 2018 2019 2020 ALL BIKES 125cc +
GASGAS 3M GRAPHICS KIT 2018 2019 2020 ALL BIKES 125cc +
GASGAS 3M GRAPHICS KIT 2018 2019 2020 ALL BIKES 125cc +
GASGAS 3M GRAPHICS KIT 2018 2019 2020 ALL BIKES 125cc +
  • Load image into Gallery viewer, GASGAS 3M GRAPHICS KIT 2018 2019 2020 ALL BIKES 125cc +
  • Load image into Gallery viewer, GASGAS 3M GRAPHICS KIT 2018 2019 2020 ALL BIKES 125cc +
  • Load image into Gallery viewer, GASGAS 3M GRAPHICS KIT 2018 2019 2020 ALL BIKES 125cc +
  • Load image into Gallery viewer, GASGAS 3M GRAPHICS KIT 2018 2019 2020 ALL BIKES 125cc +
  • Load image into Gallery viewer, GASGAS 3M GRAPHICS KIT 2018 2019 2020 ALL BIKES 125cc +

GASGAS 3M GRAPHICS KIT 2018 2019 2020 ALL BIKES 125cc +

Regular price
£79.99
Sale price
£79.99
Regular price
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.

Fitment 

All GASGAS 3M models 125cc+

Years 

2018 , 2019 & 2020

 

Features 

High quality laser cut graphics printed in high resolution

Premium 3m vinyl with triple layer protection

Easy to apply 

 

Lead time 

Please note that all graphics are custom and printed to order. For that reason we factor in 2-3 weeks to allow time for printing and delivery. As these are printed to order you cannot return them for a refund if you change your mind 

 

Graphics included:

Front mudguard

Rear mudguard 

Left & right Rad shrouds

Left & right number boards 

Headlight

Swingarm

Fork guards

Fork stickers 

  

Installation instructions 

 

1. Clean your plastics, hands and work area. Remove dirt, oil, old adhesive and anything else from the front and the back side of the machines plastic 

2. Before applying, trim the paper backing around the perimeter as close to the graphic as possible (without actually cutting the graphic). Remove the paper inside of the vent and bolt holes. Check the alignment of holes, vents, curves and edges of the graphic against the plastic 

3. Spray a fine mist of application fluid on your plastic 

4. Remove the backing paper from your decal, and be sure to keep the adhesive side free of dirt, dust and debris. Spray the adhesive side with a fine mist of application fluid 

5. Lightly apply the decal to the plastic while lining up bolt holes and vent holes.

6. Once everything else is lined up properly, begin from the centre and use a squeegee to move the application fluid to the edge of the plastic 

7. As you continue the squeegee process you may add heat with a heat gun or hair dryer in order to speed up the drying process. Heat will also help work out any air bubbles and smooth any wrinkles. Warning excessive heat will cause the decal to overstretch and distort the image 

8. Use a clean, dry cloth to wipe the excess fluid that is remaining around the edge of the plastic 

9. it is recommended that you do not ride the bike for at least 24 hours to ensure proper adhesion to the decal