{"product_id":"gmc-savana-brake-light-reversing-camera-5-suction-monitor-03-16-back-up","title":"GMC Savana Brake Light Reversing Camera \u0026 5\" Suction Monitor 03-16 Back up","description":"\u003ch3\u003eCamera Description\u003c\/h3\u003e\n\u003cp\u003ePlease note this is an aftermarket part designed to fit GMC Savana vans from years 2003-2016.\u003c\/p\u003e\n\u003cp\u003eThis camera is designed to replace the 3rd brake light situated on the rear of the vehicle.\u003c\/p\u003e\n\u003cp\u003ePlease note this kit comes with everything required to install this system\u003c\/p\u003e\n\u003cp\u003eThe old light is simply removed and replaced with this unit. A 10m cable then is run to your monitor at the front of the vehicle.\u003c\/p\u003e\n\u003cp\u003ePlease see the instructions below to see installations instructions.\u003c\/p\u003e\n\u003ch3\u003eCamera specifications\u003c\/h3\u003e\n\u003cp\u003eCable Length - 10 Meters\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMin illumination:0Lux (LED ON)\u003c\/li\u003e\n\u003cli\u003eImage sensors: 1\/3? colour HD CMOS\u003c\/li\u003e\n\u003cli\u003eSystem: NTSC\u003c\/li\u003e\n\u003cli\u003ePerfect IR night vision, 8 pcs IR LED\u003c\/li\u003e\n\u003cli\u003eNight Vision distance:30ft\u003c\/li\u003e\n\u003cli\u003eMinimum illumination. \u0026lt;0.5 BLC: Auto\u003c\/li\u003e\n\u003cli\u003eWhite Balance: Auto,Video Colour: Colourful\u003c\/li\u003e\n\u003cli\u003eWaterproof Class: ip68\u003c\/li\u003e\n\u003cli\u003eEffective Pixels : 756(H)*504(V)\u003c\/li\u003e\n\u003cli\u003ePixel Resolution : 600TV lines\u003c\/li\u003e\n\u003cli\u003eVideo Output: 1.0Vp-p,75\u003c\/li\u003e\n\u003cli\u003eElectronic Shutter: 1\/60\u003c\/li\u003e\n\u003cli\u003eS\/N ratio: Better Than 48db\u003c\/li\u003e\n\u003cli\u003eLens Angle: 170°\u003c\/li\u003e\n\u003cli\u003eOperation Temperature: -20°C+70°C RH95%\u003c\/li\u003e\n\u003cli\u003eStorage Temperature: -40°C+100°C RH95%\u003c\/li\u003e\n\u003cli\u003eWorking Power (DC): 12V\/1,5\u003c\/li\u003e\n\u003cli\u003eWatt Current consumption: 90mA Max\u003c\/li\u003e\n\u003cli\u003eVideo cable is RCA connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e5\" Suction Monitor Description\u003c\/h3\u003e\n\u003cp\u003ePAL\/NTSC auto switch\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eDisplay Size: 5\"\u003c\/li\u003e\n\u003cli\u003e480 x 272 resolution with 16:9 aspect ratio\u003c\/li\u003e\n\u003cli\u003eAutomatically goes to sleep once there is no video being shown\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWakes up and turns on as soon as it receives a video signal.\u003c\/p\u003e\n\u003cp\u003eSuction cup mounting bracket\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003e2-channel video input:V1\/ V2 auto switching(V1 display first )\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003eNote: Please Connect the Rearview camera's video cable with LCD's yellow cable (Video V1)Then the LCD will show Camera's video when you are Reversing, and stop playing movie (auto switching)\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003eSimple to install\u003c\/p\u003e\n\u003cp\u003eFull colour display\u003c\/p\u003e\n\u003cp\u003eInstallation tips:Two-way video inputs will display a black screen when no there is no signal\u003c\/p\u003e\n\u003cp\u003ePlease note image cannot be flipped so cannot be installed upside down\u003c\/p\u003e\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\u003cp\u003eBrake light reversing camera\u003c\/p\u003e\n\u003cp\u003e5 \" Suction Monitor\u003c\/p\u003e\n\u003cp\u003e10 meter 4 pin extension cable\u003c\/p\u003e\n\u003cp\u003eMale to Male connection\u003c\/p\u003e\n\u003cp\u003e4 Pin accessory Cable\u003c\/p\u003e\n\u003cp\u003e12v Power adaptor for camera\u003c\/p\u003e\n\u003cp\u003e12v Power adapter for Monitor\u003c\/p\u003e\n\u003ch3\u003eInstallation Instructions\u003c\/h3\u003e\n\u003cp\u003ePlease refer to the diagram for reference which can be found in the in images for this kit\u003c\/p\u003e\n\u003cp\u003eWe recommend before installing the product in place test everything to check that it works.\u003c\/p\u003e\n\u003cp\u003eFirst thing to consider is which power source you are going to use to turn on the camera. This can be done in a few ways and is specific to each vehicle, but this can be done by:\u003c\/p\u003e\n\u003cp\u003e- Using the wire signal coming from when reverse is engaged.\u003c\/p\u003e\n\u003cp\u003e- Using the reverse gear signal wire on the loom for an aftermarket stereo\u003c\/p\u003e\n\u003cp\u003e- Using a scotch lock and use the power source from the reversing light. This option will require running an additional cable to the front of the Vehicle.\u003c\/p\u003e\n\u003cp\u003eThis power source can be used for the camera (1) and the monitor (7) should you want them both to turn on only when reverse is engaged\u003c\/p\u003e\n\u003cp\u003eBelow is a description of each wire\u003c\/p\u003e\n\u003cp\u003eAccessory Cable\u003c\/p\u003e\n\u003cp\u003e(1) Red - 12v power supply\u003c\/p\u003e\n\u003cp\u003e(2) Black - Ground\u003c\/p\u003e\n\u003cp\u003e(3) Yellow - CameraCamera side wiring\u003c\/p\u003e\n\u003cp\u003e(4) Red - Positive from existing brake light\u003c\/p\u003e\n\u003cp\u003e(5) Black - Ground from existing brake light\u003c\/p\u003e\n\u003cp\u003e(6) 4 pin connectionMonitor wires\u003c\/p\u003e\n\u003cp\u003e(7) Red - 12v power supply (fused) Can use same power feed as camera(\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack - Ground\u003c\/li\u003e\n\u003cli\u003e(9) Yellow - Av source 1 (Camera)\u003c\/li\u003e\n\u003cli\u003e(10) White - Av source 2 (DVD player or Dash cam)\u003c\/li\u003e\n\u003cli\u003e(11) Male to Male Av connector (Used to connect cables (3) \u0026amp; (9) together)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the parking lines are turned off as default and you require them simply cut the brown loop which is exposed on the wiring loom\u003c\/p\u003e\n\u003cp\u003eIdeally the 10m cable should be installed inside the van with the panels inside removed. For applications where this is not possible the cable can be run externally but be aware damage can be caused by debris off the road and heat from the exhaust.\u003c\/p\u003e\n\u003cp\u003eShould you have issues with the brake light not working this can be because the polarity is the incorrect around meaning the positive and negative need to be switched\u003c\/p\u003e","brand":"The Bike House 1","offers":[{"title":"Default Title","offer_id":55693465059704,"sku":"GMC Savana Cam \u0026 5\" Suction","price":95.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0515\/9646\/0204\/files\/s-l1600_b03c419f-2ddc-4bf1-add2-292bdd2955e5.jpg?v=1791379576","url":"https:\/\/thebikehouse.co.uk\/products\/gmc-savana-brake-light-reversing-camera-5-suction-monitor-03-16-back-up","provider":"The Bike House 1","version":"1.0","type":"link"}